Monday, November 5, 2012

Refinish Hardwood Floors Oil Water Based

Pictures of Refinish Hardwood Floors Oil Water Based

Above Parr Hardwood Floors, Inc.
3 coats Water based urethane Sand, Fill and Refinish Stain – your choice of color (optional) Finish: 2 or 3 coats Oil based polyurethane ***Do not clean hardwood floors with oil soaps, furniture oil, Pledge, Old English, etc.*** ...

Tool Rental - Dust Containment - The Home Depot










Access This Document

Refinish Hardwood Floors Oil Water Based Pictures

Waterborne Finishes
Hardwood floors. Unlike all-purpose cleaners and oil soaps, it cleans without Refinish your hardwood floors solvent-based finishing products and lacks dust containment, creates an environment of hazardous ... Read Content

Images of Refinish Hardwood Floors Oil Water Based

Hardwood floors Maintenance Guidelines For Commercial ...
Hardwood floors maintenance > Never use floor wax, oil-based detergent, or any other household cleaner on the floor. These products can dull or damage the finish, and can leave a greasy and refinish floor if needed. Cleaning tips ... View Document

About Experts Sitemap - Group 82 - Page 7 2012-07-27
And the most common is to much water during cleanup. engineered hardwood floors, cement slab, question pool: Hi Evonne Impregnation: You can test that yourself on an inconspicuous spot. Put a drop of edible oil on the topside of the stone, remove it after 24 hours. ... Read Article

Refinish Hardwood Floors Oil Water Based Pictures

Protecting Workershome Owners From Wood floor-finishing ...
Specialty techniques allow the creation of similar appearance with water-based products. If oil- Syracuse police said LeBeau, who runs Hardwood Floors by Steve LeBeau, was using a lacquer varnish to finish a wood floor when the fumes ignited. ...

Dura Seal Water Based Polyurethane Floor Finish Application










Dura Seal Water Based Polyurethane is a one component floor finish that is an environmentally friendly alternative to oil based hardwood floor finishes. It applies just as easily as an oil based polyurethane, and retains a traditional look.

Duraseal Waterbased Poly needs no additional hardener or catalyst. It dries in 2 to 3 hours depending on conditions, and is ready for light traffic in 24 hours. With it's low 275 VOC level, it is approved for use in all 50 states.

One great feature about Dura Seal Water-Based Polyurethane is that is is available in four different sheens, Matte, Satin, Semi Gloss, and Gloss. The Matte sheen is quite impressive, looking like an old wax or penetrating oil finish.

For more information, pictures, or to purchase Dura Seal Water Based Polyurethane, please visit:
http://www.chicagohardwoodflooring.com/dura-seal-water-based-floor-finish


Return Doc

No comments:

Post a Comment